VOLTAS SAC 183V VECTRA Inverter 1.5 Ton 3 Star Split Air Conditioner

Save 41%
No reviews

Color: White
Installation Type: ‎Split System
Tonnage: 1.5 Ton
Sale priceRs. 37,088.00 Regular priceRs. 62,990.00

Check If Your Location Is Serviceable Below


1.5 Ton 3 Star Adjustable Inverter AC with Adjustable mode. Runs at 4 different cooling capacities for different cooling needs. The VOLTAS Split AC is a high-performing, long-lasting and budget friendly air conditioner. The air conditioner comes with Multi Adjustable Mode that allows you to adjust cooling from low to high at any time keeping your family cool in different seasons. The Pure White Cooling System of this air conditioner reduces noise emitted further improving the overall quality of life for those living in a room.

Additional Features

  • Full Load Capacity (100%) [W]: TBD
  • Half Load Capacity (50%) [W]: TBD
  • Compressor Type: High EER Rotary - BLDC
  • Refrigerant Gas: R32
  • Power Supply [V/Hz/Ph]: 230 / 50 / 1 Phase
  • Full Load Power (100%) [W]: TBD
  • Half Load Power (50%) [W]: TBD
  • Condenser Coil: Fin & Tube
  • Connecting Pipe [Type]: Cu-Cu(12.7mm & 6.35mm)
  • Connecting Pipe Length [Metre]: 3.0
  • Connecting Cable [Metre]: 3.0
  • No. of Boxes IDU: 1 Box
  • No. of boxes ODU: 1 Box

Care Instructions

  • Do not use acid to clean.
  • Wipe clean with a wet cloth.
  • Cleaning your product regularly will help you maintain them for a long time.
  • Recommended Every 1 Year required wet servicing.
  • Recommended 3 dry servicing in a year.
  • Do not keep the window or door open when the AC is ON.


Chargeable as per Distance.


Installation Details

Installation will be arranged within 48 hours of delivery.

Standard installation Charges:

→ ₹1200/- (excl of GST)

→ ₹699/- (excl of GST)

 Standard installation of Air  Conditioners covers: 

  1. Installation of mounting brackets
  2. Drilling of holes into a brick wall for taking out the pipes. 
  3. Fixing a hole sleeve & cap. 
  4. Fixing the indoor and outdoor unit. 
  5. Connecting indoor and outdoor units using the standard Kit provided by the manufacturer (at additional cost, unless specified otherwise). 
  6. Wrapping the pipe with seasoning tape. 

Non-standard Installation

Not covered as part of standard Installation charges are: 

  1. Outdoor unit stand
  2. Extra copper wire
  3. Drain pipe extension
  4. Wiring extension from the meter to the installation site 
  5. Stabilizer, if needed, is chargeable. 
  6. Plumbing and masonry work. 
  7. Power-point/MCB fitting and any other electrical work. 
  8. Carpentry work. 
  9. Dismantling/shifting of the old AC's masonry 
  10. Core cutting fabrication and electrical.

Non standard installation charge is subject to site inspection. Book a Site Visit

You may also like

Recently viewed